A dripping tap is the most common job we do, and the one that costs you the most if it’s left: water down the drain, a stain in the basin, and a washer that’s wearing the seat underneath it. We fix the cause, not just the drip.
Any of these? Send a photo and we’ll tell you what it is and what it’ll cost.
We aim to respond to all enquiries within one business day.
"*" indicates required fields
Four steps, and the fourth is the one most people skip.
A drip can be the washer, the seat it closes onto, the spindle, the O-rings or the cartridge. We check, rather than guess.
Washers, seats, spindles and O-rings on standard taps; the cartridge on a mixer. Common parts are on the ute.
A new washer on a worn seat drips again in a month. If the seat is pitted, we recut it so the washer has something to seal against.
Hot and cold, full pressure, no drip, no stiffness. Benches wiped, nothing left behind.
Most dripping taps are a small part on a sound tap. Some have had their last washer. We’ll tell you which.
The tap body is sound and the parts are still made.
It’s a washer, seat, spindle, O-ring or cartridge.
The drip started recently, or after a washer change that didn’t take.
You like the tap and it suits the room.
The body is corroded or cracked, or the parts are no longer available.
It’s been repaired more than once and keeps coming back.
The spout or base leaks where it meets the bench.
You’re changing the basin or the kitchen anyway.
Either way, the price comes first. Phone quotes are free.
A lot of North Shore homes still have their original brass taps, and they’ve lasted because they were made to be repaired. The washer wears, the seat under it pits, and a drip starts. Changing the washer without recutting the seat is why the drip comes back.
Mixers are a different job. The cartridge does all the work, and when it wears the mixer drips from the spout or weeps at the handle. Cartridges are brand-specific, so a photo of the mixer saves a second visit.
A steady drip runs all day and all night. It’s not a big number per hour, but it never stops, and it shows up on the bill long before you’d notice it in the basin.
Kitchen, bathroom, laundry, outside. Hot, cold or a mixer.
Mixer cartridges are brand-specific. A photo of the mixer is as good as the name.
Dripping from the spout, weeping at the base, stiff to turn, or spinning.
The tap and the drip. It tells us most of what we need.
Phone quotes are free. You know the price before any work starts.
A new washer won’t help if the seat is worn. We repair what actually failed.
Common parts on the ute, and a photo beforehand for the ones that aren’t.
Benches wiped, cupboards repacked, nothing left for you to sort out.
Straight answers from Peter. Still not sure? Call and ask.
Usually because the seat under the washer is pitted, so the new washer has nothing smooth to seal against. We recut the seat when we change the washer.
Yes. Mixers usually need a new cartridge. Tell us the brand or send a photo and we’ll bring the right one.
Not an emergency, but don’t leave it. It wastes water around the clock and the drip wears the seat, which turns a small repair into a bigger one.
It depends on the tap and the part, but it’s one of the smallest jobs we do and we’ll price it on the phone or from a photo. Phone quotes are free.
A tap inside a unit is usually the owner’s. For rentals, the property manager arranges it with the owner; we work with them and send an invoice they can forward.
A cistern that keeps refilling wastes far more than a dripping tap. Usually a flush valve or inlet valve.
Water under the sink with the tap dry is a pipe or a connection, not the tap. We find the source.
Everything else on the everyday list: fixtures, connections, pressure and drainage.
Call or send a photo of the tap. Most tap repairs can be quoted on the spot and fixed in one visit, and phone quotes are free.
Peter answers, or calls you straight back if he’s under a house. He’ll ask a few questions, give you a price, and tell you honestly when he can get there.